Zhejiang Naibang Valve Co.,Ltd
+86-577-67991298 sale@nipovalve.com

Products

Check Valve

Wafer Dual Plate Check Valve Retainerless Design

Wafer Dual Plate Check Valve Retainerless Design

Structural Feature Short structural length,only 1/4~1/8 of that of traditional flanged check valve; Low volume,light weight,only 1/4~1/20 of those of traditional flanged check valve; Quick valve disc closedown,low water hammer pressure; Applicable for and easily installed for vertical or...

Products Details


Information

The main purpose of the Dual Plate Wafer Check Valve is to perform the work of almost any conventional valve. However, being smaller makes it lighter and, therefore, is more cost efficient to purchase, install and maintain. It is also a silent check valve; because of it's innovative design, it does not slam upon closing.

The Dual Plate Wafer Check Valve plate design and flat seat offer many advantages. The flat seat eliminates any possibility of board snaps in the seat, which snaps occur frequently in other valves. When suspended in a vertical pin, the two plates have a reduced weight which eliminates excessive wear on the plate lugs. This wear can cause the plate to collapse on the seat's open surface, causing the valve to subsequently fail.

An important feature of the Dual Plate Wafer Check Valve is that it does not depend on the pressure or flow to center the plates in relation to the sealing surface in order to make the seal.

Single plate conventional designs, even those having centering guides, require a backpressure and backflow to center the plate to the seat in order to get a non leakage adjustment. This feature becomes extremely risky in the event of reduced flow and the handling of gases at low pressure.

 

Product Range

End Connection: RF,RTJ, BW

Nominal diameter:1.5"~60"(DN40~DN1500)

Pressure range: Class150~2500(PN16~PN420)

Working temperature:-196℃~+560℃

Body material: Carbon steel, Stainless steel, Alloy steel, Bronze


Design Features

Design in accordance with API 594

End to end dimension as per API 594

Flange dimensions in accordance with ASME B16.5, ASME B16.47

Inspection and Test according to API 598

NACE MR-0175 Service

Availability LUG design

Availability Double Flange from 12"

Single Spring for 2" to 6"

Double Spring for 8" and up




Equipped with a professional factory, Naibang Valve is a professional manufacturer and supplier of wafer dual plate check valve retainerless design in China. If you want to buy quality product of various beautiful bags, you can get it at a cheap price from us.
Hot Tags: wafer dual plate check valve retainerless design China, manufacturer, supplier, factory, quality, cheap, product
Related Products
Feedback
Feedback
If you have any enquiry about quotation or cooperation, please feel free to email us at sale@nipovalve.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
Contact Us
Address: No.43 Zhongxing Road, Tangtou Industrial Zone, Oubei Town, Yongjia County, Wenzhou, Zhejiang, China
Tel: +86-577-67991298
Fax: +86-577-67991298
E-mail:sale@nipovalve.com
Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML